Buy it Again
Duraflame Stix Fire Lighter - 12 Count

Duraflame Stix Fire Lighter - 12 Count


Multi-use firestarters. Fire Wise: Made from 100% renewable resources. Reduces wood fire emissions. Just split, stack & start. Fireplaces, BBQs, campfires. Lights 6 Fires: 2 sticks per fire. One package will light 12-24 BBQ fires. Made from 100% renewable resources. Duraflame Stix Firestarters are made from 100% renewable waxes and oils combined with recycled wood and agricultural fibers. No petro-chemicals are used. Reduces total emissions from wood fires. Using Duraflame Stix Firestarters to light a wood fire results in faster and more complete ignition of the fire, reducing emissions of particulate matter and carbon monoxide. Classified UL listed. Processed solid fuel for use in listed factory-built fireplaces. Duraflame Firestarters are suitable for use in UL/C-UL/ULC listed factory-built fireplaces. Certified Low VOC Emission Product: This product complies with South Coast Air Quality Management District Rule 1174, Ref. C221-B10. Air Quality Advisory (Nov - Feb)
Product Attributes
Warning Contains: Use Caution when Building a Wood Fire: Open fireplace damper before lighting a fire. Close wire mesh protective screen after the fire has started. Do not poke burning firestarters as flaming particles may stick to the tools. Never add any volatiles (e.g., liquid firestarter, aerosol cans) to any fire. Never leave a fire unattended, nor allow children or pets to play near the fireplace. If necessary to extinguish a fire, use a fire extinguisher or carefully douse fire with water or sand. Use Caution when Lighting a BBQ Fire: Always follow charcoal and grill manufacturers' instructions. Only use BBQ outdoors in a well-ventilated area. Store firestarters in a cool, dry place away from heat and direct sunlight. Keep out of reach from children and pets. Not for suitable for human or animal consumption. California Proposition 65 Warning: Burning fireplace or wood stove fuels such as natural fi
Directions Instructions for Lighting a Wood Fire: 1. Break off two (2) stix firestarter sticks (Store the remaining firestarter pieces in a reclosable bag for future use. 2. Place in an X configuration on the center of the fireplace grate. 3. Place a couple pieces of firewood around the firestarters. Light the ends of the firestarters. 4. Once the fire is ignited, carefully add more wood as needed. Close fireplace screen. Instructions for Lighting a BBQ Fire: Use 1/2 a firestarter stick per 2 lb of charcoal. 1. Use 1/2 of a Stix Firestarter Stick for each 2 lbs of charcoal. Break off one (1) section from the block of six. Break that piece in half (Store the remaining firestarter pieces in a reclosable bag for future use). 2. Place the 1/2-piece on the bottom of the grill (under the charcoal grate). (If the grill has a flat bottom, break off two small pieces from the ends of the 1/2-piece and use them as supports under the larger piece to allow air flow under the starter material). 3. Replace the
About the Producer Duraflame


Product details/images for convenience only.  Consult Product label for the most current and accurate information.  We assume no liability for any inaccuracies/misstatements about Products listed on our website/app.